mirror of
https://github.com/by-jp/www.byjp.me.git
synced 2025-08-09 01:35:56 +01:00
36 lines
3.8 KiB
Markdown
36 lines
3.8 KiB
Markdown
---
|
||
date: 2025-05-07T08:16:16.823+01:00
|
||
publishDate: 2025-05-07T08:16:16.823+01:00
|
||
likeOf: https://hackaday.com/2025/05/06/building-a-diy-chicken-incubator/
|
||
references:
|
||
https://hackadayCom/2025/05/06/buildingADiyChickenIncubator/:
|
||
url: https://hackaday.com/2025/05/06/building-a-diy-chicken-incubator/
|
||
type: entry
|
||
name: Building A DIY Chicken Incubator
|
||
author:
|
||
type: card
|
||
name: Lewin Day
|
||
updated: May 6, 2025
|
||
content:
|
||
html: |-
|
||
<p>If you want to keep eggs warm to hatch, you’ll need an incubator. You could buy one off the shelf, but they’re not so complex — just a nicely-controlled warm box you could easily whip up yourself. As it turns out, <a href="https://www.youtube.com/watch?v=jfRLMU6guQQ" target="_blank">that’s precisely what [RCLifeOn] did. </a></p>
|
||
<p>The incubator is built out of wooden panels screwed together to make a simple box. The frame of the front door is also wood, but it features 3D printed hinges and handles, because that’s the easiest way to make hardware <a href="https://hackaday.com/2019/11/14/5-kilowatts-in-a-3d-printed-jet-boat/">when you’re a printing wizard like [RCLifeOn].</a></p>
|
||
<p>The box is fitted with controls for humidity and temperature to ensure the best possible conditions for hatching chicken eggs inside. As you might have guessed, a heated bed from a 3D printer was used to control the temperature inside. As for humidity, a sensor tracks the conditions in the box, and triggers an ultrasonic mister to increase the level as necessary. There’s also a little motion introduced via a moving platform run by a motor and some step-down gearing, which apparently aids in the hatching process.</p>
|
||
<p>[RCLifeOn] calls it “a machine that creates life,” and that honestly sounds about fair. <a href="https://hackaday.com/2016/03/28/start-your-poultry-brood-with-this-diy-egg-incubator/">We’ve seen similar projects along these lines before, too.</a></p>
|
||
<p><span id="more-778685"></span></p>
|
||
<p><iframe title="I Built a Machine That Creates Life" width="800" height="450" src="https://www.youtube.com/embed/jfRLMU6guQQ?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen=""></iframe></p>
|
||
<p>[Thanks to Chris Muncy for the tip!]</p>
|
||
text: |-
|
||
If you want to keep eggs warm to hatch, you’ll need an incubator. You could buy one off the shelf, but they’re not so complex — just a nicely-controlled warm box you could easily whip up yourself. As it turns out, that’s precisely what [RCLifeOn] did.
|
||
The incubator is built out of wooden panels screwed together to make a simple box. The frame of the front door is also wood, but it features 3D printed hinges and handles, because that’s the easiest way to make hardware when you’re a printing wizard like [RCLifeOn].
|
||
The box is fitted with controls for humidity and temperature to ensure the best possible conditions for hatching chicken eggs inside. As you might have guessed, a heated bed from a 3D printer was used to control the temperature inside. As for humidity, a sensor tracks the conditions in the box, and triggers an ultrasonic mister to increase the level as necessary. There’s also a little motion introduced via a moving platform run by a motor and some step-down gearing, which apparently aids in the hatching process.
|
||
[RCLifeOn] calls it “a machine that creates life,” and that honestly sounds about fair. We’ve seen similar projects along these lines before, too.
|
||
|
||
|
||
[Thanks to Chris Muncy for the tip!]
|
||
category:
|
||
- classic hacks
|
||
- chicken
|
||
- eggs
|
||
- incubator
|
||
---
|